Hot Dog machines

       Hot Dog machines Roller grill. 



Congratulations for the acquisition of this upmarket appliance made in France. You 
chose an appliance which alloys the best technical qualities with a big user-
friendliness. We wish you the biggest contentment

1. SECURITY INSTRUCTIONS

Please respect these instructions scrupulously to avoid any 
risk of fire, electric shock, scald or other wounds and dam-
age. During the use of this appliance, fundamental circum-
spection of security must always be noticed, such as:
- Take into account the instructions to be systematical-
ly kept with the appliance. 
- Install the appliance always in instructions respect. A 
10 cm distance minimum with the partition or the wall 
is necessary. 
- Protect the appliance from direct light of the sun, 
frost and humidity. 
- Never leave the appliance within the reach of chil-
dren or disabled persons without surveillance.
- Ensure that only trained personnel operate the appli-
ance.
- Never move the appliance when it is working.
- Check that the appliance is definitely off before con-
necting it up or disconnecting it.
- Do not touch the hot surfaces of the appliance. The
temperature of the hot surfaces can be very important 
when the appliance is working. Always use handles 

and control knobs.


Made in france . 


Do not use the appliance for other functions than 
determined use. 
- Do not leave the cord of electrical feeding in the
contact of hot surfaces. 
- The appliance should not be used close to combus-
tible materials.
- During use, look after not to obstruct hearings of
aeration of the appliance.
- To avoid any electric shock, never plunge the ap-
pliance, the cord or plug in water or quite other liq-
uid. 
- If the cord is harmed, it must be replaced by the 
producer, his after sale service or persons of similar 
skills to avoid any risk.
- Entrust compensations only to a skilled person.
- Use only spare parts of origin.
- At the end of cooking, before cleaning the appli-
ance, do not forget to disconnect it.

2. CONTENTS OF CARDBOARD PACKAGING

Device: A hot dog machine
Accessories:- A stainless steel lid (except HD 4)
 - A stainless steel 2-section basket (except HD 4)
 - A Pyrex glass packaged in a box (except HD 4)
 - A water container (except HD 4)
 - The present note
See exploded views for each hot dog machines at the end of the document
3. CONFORMITY OF USE
Use the device only to steam sausages (except HD 4) and to toast the bread inside 
thanks to heating pins (except CS 0 E) 

4. WAY OF FUNCTIONING

The hot dog machine HD 4 is available with only 4 heating pins.
The model CS 0 E is available without any heating pins but with a water container.
The others models are fitted with a heated container for cooking and keeping hot 
dogs in a damp atmosphere created by means of the water poured in the water tank.
The container is composed of a Pyrex glass casing placed over the tank. This glass 
casing holds a 2-section basket : one for the hot dogs being cooked, the other for the 
cooked hot dogs. 
The hot dogs never come into contact with the water, they are just gently cooked.
The heating pins enable toasting the bread inside into which you will slide the hot 
dog.
An energy regulator enables to modulate the temperature of the element and water 
container.
To turn on the device, just turn on the power control knob (n°2 on picture) on the 
wished position. If you want a quick preheating, set it on maximum position.
The orange pilot light ignites (n°1 on picture) during heating. When orange pilot light 
switches off, the device is ready for cooking.

5. FUNCTIONING / MANIPULATION

a) Installation / assembly:
- Unpack carefully the device of its packaging.
- Place the hot dog machine on a plane and heatproof surface.
- Never place the device near a wall or near a partition makes of combustible 
materials even if it is very well isolated.
- A distance of minimum 10 cm with the partition or the wall is necessary.
- Unpack carefully the accessories, wash them and install them.
b) First starting:
Fill in the water tank till maximum level (about 5cm of water) before connecting the 
appliance. 
Always operate your appliance with water in the tank.
First cleaning
Clean the device before the first use. (See 6 Cleaning) 
Connection of the device
- Check that the tension and the frequency of the electricity network suit to the 
values indicated on the descriptive plate.
- Make sure that every control knob is positioned on 0.
- Check that neither the cord nor the plug are damaged
- Unwind completely the electric power cable and connect it in a plug connected 
with the earth.
- The device is connected.
NB: in case of connection of the device in a plug without earth protection or directly 
on the electricity network, confide its connection to a qualified person .
c) Use of device :
Elements of command and display
13
Command/Display Function
Power control knob (n°2 on 
picture)
Temperature setting
Orange pilot light
(n°1 on picture)
Machine is heating (pilot light on)
Temperature reached (pilot light off)

You can see video ⬆ . 

How to use machines

Putting on
Turn on the power control knob (n°2 on picture) on the wished position: the or-
ange pilot light (n°1 on picture) ignites. 
For a quick preheating, set the power control knob on maximum position. 
Once orange pilot light (n°1 on picture) is off, the machine reached the wished 
temperature.
For a continuous heating, select position C on power control knob. 
Temperature setting
Set the temperature by positioning the power control knob (n°2 on picture) to the 
desired temperature. The orange pilot light (n°1 on picture) switches on if a high-
er level of temperature is required and switches off when the same is reached. 
Stopping the appliance
Set power control knob (n°2 on picture) on 0: the orange pilot light (n°1 on pic-
ture) switches off and the appliance is no longer functioning.
Let the device cool.
Disconnect the power cable.
Clean the appliance. (See 6. Cleaning)
d) Breakdown / repair:
In case of breakdown or of damaged part, please call your after-sales service and 
confide any technical operation to qualified person.
When you contact the after-sales service of your distributor or your store, give him 
the complete reference of your device (commercial name, type and serial number). 
This information appears on the visible descriptive plate behind the device.

6. CLEANING AND MAINTENANCE

Disconnect the device. 
- Let cool completely the device before any technical intervention or cleaning.
- Only use non-abrasive products, clean regularly the external walls of your device 
with warm water and wash liquid: avoid the abrasive towelling. Rinse your device 
with a wet sponge.
- Never clean the device under a water jet, the infiltrations would risk to damage it in 
a irreparable way.
- Never immerse the device, the cord or the plug in the water or quite other liquid to 
avoid any electric shock.
- During a prolonged non-use, we recommend you strongly to keep the device 
shielded from the humidity.

Comments