Profesional Salamander comercial .
Company : Roller grill .
Made in by France 🇫🇷
The commutator allows independent control of the 2 heating zones.
This cheese melter is completely open on 3 sides to accept dishes of any size.
The professional electric salamander SEM 600 Q is easy to clean: the grid and the lower tray are completely removable. The quartz tubes can easily be wiped with sponge once the electric salamander is turned off and cooled down .
⚫ Always use handles and control knobs.
➡ Do not use the appliance for other functions than deter-
mined use.
➡ Do not leave the cord of electrical feeding in the contact
of hot surfaces.
➡The appliance should not be used close to combustible
materials.
➡During use, look after not to obstruct hearings of aera-
tion of the appliance.
➡To avoid any electric shock, never plunge the appliance,
the cord or plug in water or quite other liquid.
➡If the cord is harmed, it must be replaced by the produc-
er, his after sale service or persons of similar skills to
avoid any risk.
➡ Entrust compensations only to a skilled person.
➡Use only spare parts of origin.
➡ At the end of cooking, before cleaning the appliance, do
not forget to disconnect it.
⚫CONTENTS OF CARDBOARD PACKAGING
Device: a salamander
Accessories: - A tray
➡A grid
➡A grid with handles (SEF 800)
➡A quartz tubes protection grid (only for quartz salamanders)
➡ The present note
See exploded views for each models at the end of the document
⚫CONFORMITY OF USE
Use the device only to defrost, brown, glaze, grill toasts, gratins, pizzas, onion
soupsT without pre-heating.
⚫WAY OF FUNCTIONING
These salamanders exist in 11 versions (8 electric versions and 3 gas versions)
SALAMANDERS WITH MOVABLE TOP
Salamanders SEM 600 and SEM 800 are respectively fitted with two or three cook-
ing areas, a removable inside tray and a commutator to select power.
The top of the salamander is movable and enables you to adapt the cooking position
to grill, glaze or brown your foodstuffs.
FIXED SALAMANDERS
Salamanders SEF 800 are fitted with three cooking areas, a removable inside tray,
two racks enabling to adjust the grid with handles on 3 levels to adapt cooking posi-
tion.
To turn on the salamander, just turn the commutator control knob (n°2 on picture) on
the wished position according to desired cooking zone. The control pilot light ignites
(n°1 on picture), regarding the selected cooking area.
the device is on and the orange pilot light ignites (n°2 on picture), plate is heating.
When orange pilot light switches off, the device is ready for the cooking.
Position 1 : Left area
Position 2 : Right area
Position 3 : Complete area.
Control pilot light
Commutator.
⬛ please check ⬆ video How to use machine .
⚫FUNCTIONING / MANIPULATION
Installation / assembly:
- Unpack carefully the device of its packaging.
🔵Place the salamander on a plane and heatproof surface.
🔸 Never place the device near a wall or near a partition makes of combustible materi-
als even if it is very well isolated.
🔸 A distance of minimum 40 cm with the partition or the wall is necessary.
🔸Remove the protective film from the top, the rear, the sides and the tray.
🔸 Unlock the movable top by unscrewing the screw located on the back of the machine
thanks to a 10 pipe key (models SEM).
🔸In case of connection directly to the electrical network, a disconnection mode has to
be planned in conformity with the norms.
CAUTION : ⚠
During use: never place the machine on surfaces or near walls, partitions or
kitchen furniture and similar— except if they are made with a non combustible
material or recovered with non combustible thermic insulation, and pay atten-
tion to fire preventions rules.
🔵 First starting:
During the first use, warm your machine up outside to evacuate residual smokes of
manufacturing oil from the metallic parts. This may emit a slight smell for a few mo-
ments.
🔵First cleaning
Clean the device before the first use. (See 6. Cleaning)
Connection of the device
🔸Check that the tension and the frequency of the electricity network suit to the values
indicated on the descriptive plate.
🔸Check that neither the cord nor the plug are damaged. If necessary, it has to be re-
placed by the manufacturer, its after sale service or any qualified person to avoid any
risk.
🔸Make sure that every control knob is positioned on 0.
🔸Unwind completely the electric power cable and connect it in a plug connected with
the earth.
🔸The device is connected.
NB: in case of connection of the device in a plug without earth protection or directly on
the electricity network, confide its connection to a qualified person .
How to start machine .
1) first turn on main power .
2) after turn on heating controlling switch .
3) after turn on comunitator .
4) if want one side you can use for one side heating element .
5) after put inside food product and push down upper hood from hand . Dont press too much down it will be burn out food .
6) then if you our food is good hot so you can push up and reomve food .
How to cleaning machine.
1) first turn off main power supply .
2) Remove lower trey and clean .
3) use soft cotton west clothes. Or use sponge .
INSTALLATION inustruction .
1)Hang direct on Wall.
2) or Make by metal Stand .
Technical informations .
Model : SEM 600 Q
Voltage : 220 - 240 v . 50 / 60 Hz .
Power : 3000 kilowatt.
Current : 13 .45 Amps.
Weight : 44 kg .
Dimensions total in mm : 600 x 590 x 590 mm.
Comments
Post a Comment