Refrigerated vertical Glass Display Chiller machine .
Company : Roller grill .
Made ib by France . 🇫🇷
⏹CONFORMITY OF USE
Use the equipment exclusively for keeping food at temperatures included between
2°C and 8°C (except for meat). You get a refrigerating panoramic display RD80
which enables you to highlight your products (desserts, cakes, pies, cocktails,
beverage, etc.).
Fresh products will be presented during working and service hours. Afterwards they
will be stored in a conventional cool chamber.
To take shelter from light is very important for hygiene and it lasts the storage of
foodstuff. The light generates a photochemical reaction on the food, which causes
discoloration, loss of flavour and alimentary characteristics.
In order to soften this phenomenon, avoid to exhibit the machine at the sun.
⏹ CONTENTS OF CARDBOARD PACKAGING
Device : Cooling Display
Accessories : 5 turning glass
Shelf .
Technical documentation of the thermostat
The present note.
⏺Capcity : 60 L
⏺Temperature: +2C to +8C
⏺System: Blower (frost free)
⏺Finishing: Stainless steel
⏺Glass: 4 side double layer glass
⏺Electrical: 230 voltage 50 / 60 Hz .
⏺Weight: 180 kg .
⏺Refrigerant : 134 a CFC Free .
⏺Colours RD 60 : stainless still , gold and black.
⏺Accessories: Digital temperature controller
: 5 pic glass plate shelves.
: Brilliant internal L.E.D lighting.
: 4 Heavy duty wheel with stoper .
Many models we have .
⏹Temperature setting
The electronic thermostat is preset in factory. It can be adjusted if necessary.
To modify the temperature, refer to the technical documentation of the
thermostat.
⏹Regulation of defrost
The defrost is an important operation for ventilated refrigerating displays like RD
600 - 800 F.
A homogeneous temperature is ensured thanks to the air circulation through the
evaporator. This evaporator has a negative temperature when the compressor is
working. In this way, its blades “trap” the humidity as frost, and the air of the
chamber dries. If there is too much frost, the air cannot circulate through the
evaporator and the internal temperature rises.
In order to avoid this phenomenon, the defrost programmed in the factory stops the
compressor 10min every 2 hours.
These values can be adjusted by your technician. It depends on the type of products
presented in the refrigerating display, on the use and the environment.
To stop the display during the night and the closing days enables a total defrost.
🔷Daily Cleaning maintanance .
1) closed main power .
2) Remove inside All food products .
3) Removed inside glass shelfs .
4) use soft cotton west .
🔷Priventy maintanance .
1) Condenser Unit cleaning process .
2) remove Right or left side stainless Steel cover .
3) use blower motor or brush .
4) clean it water trey if full water trey .
5) check Drainage pipe block or dirty so clean properly .
Comments
Post a Comment